How to Work With Slippery Fabrics

How to Work With Slippery Fabrics

Such materials can often be a challenge merely because it is often hard to maintain it completely still, whether it is on the cutting table or on the sewing machine. You should encounter fewer issues by following these tips.


While it may not seem like the greatest concept, a touch of starch on these kinds of fabric will do wonders to keep you in place so you can work on it. The trick is not to use so much that the fabric becomes completely unmanageable, but to use enough to hold it in place.

Rotary Cutters


Accuracy when cutting is often a significant issue for individuals when working with slippery materials, not least because scissors tend to slide while being used on them. Consider using a rotary cutter to prevent this. This will not only allow you to get the cutting done much quicker but will also be much more accurate and consistent as there is less possibility of slipping during the cut.



Using Pins

You Should use pins when working with fabrics and you’re going to realize that they are really important when working with slippery pieces. Try to have more pins than you think you would need for an equivalent piece of easier fabrics, Actually When you use more, the slipping chance goes down. Avoid put pin heads over the fabric, as they can lead to it becoming distorted, but be sure to make special use of them when creating seams.

Previous post Next Post

Related Posts

Fabric Measurements Guidelines
We sell fabric by the Yard; a term called Linear Yard which is sometimes confused with Square Feet where the latter r...
Read More
Walking in a store, or across the neighborhood, you must have seen those beautiful leather-like bags and belts on dif...
Read More
They are different fabrics and different materials that you can use for different purposes. These materials have vari...
Read More


Leave a comment